How to Clean and Store Your Zamberlan LOGO BOOT CASE

Quick answer

Clean your Zamberlan LOGO Boot Case by brushing off loose dirt, spot-cleaning with mild soap and water, and air-drying completely before storing it in a cool, dry place.

Step-by-step cleaning and storage guide

1. Step 1: Shake out loose debris: Take the boot case outside and turn it upside down. Shake vigorously to remove loose dirt, sand, and pebbles. Use your hand or a soft brush to dislodge stubborn particles from corners and seams. Check the zipper track for grit that can cause sticking.
2. Step 2: Spot clean with mild soap: Mix a small amount of mild detergent with cool water. Dip a soft cloth or sponge into the solution, wring it out well, and gently scrub soiled areas. Avoid soaking the fabric—damp is fine, wet is not. Never use bleach or harsh chemicals; they can weaken the fabric and fade the orange color.
3. Step 3: Rinse and air dry: Wipe the cleaned areas with a cloth dampened with plain water to remove soap residue. Pat with a dry towel to absorb excess moisture. Leave the case open and air dry completely away from direct heat or sunlight. Make sure the case is 100% dry before storing to prevent mildew.
4. Step 4: Store properly: Once dry, zip the case closed and store it in a cool, dry place. Avoid cramming it into a tight space where it could get crushed. If storing for a long period, keep it slightly open to allow airflow. Do not store the boot case inside a sealed plastic bag—it traps moisture.

Product facts

• LOGO BOOT CASE - Orange: The Zamberlan Logo Boot Case is made to hold your boots and all the grime, gunk, and debris they pick up. This means the case will get dirty quickly, so knowing how to clean it properly prevents odors and extends its life.