Start with the lace you already have
The safest way to choose replacement boot laces for hiking is to measure the lace you are taking out. Lay it flat, smooth out any kinks, and measure end to end. That number is your starting point, not a guess based on boot height alone.
If the old lace is too frayed to measure accurately, use the boot height as a guide and then check the sizing chart below. Zamberlan's round replacement laces come in five lengths, each matched to a category of boot height and size. The chart is the reference you should trust over a rough estimate.
Match lace length to boot height
The Zamberlan Round Boot Laces sizing chart pairs each length with a boot type. Use it after you have measured your old lace, and treat it as a confirmation step rather than a substitute for measuring.
- 125cm: Listed for 3" low-cut shoes.
- 150cm: Listed for 5" and 6" tall boots.
- 175cm: Listed for 8" tall boots, and larger sized 6" boots.
- 190cm: Listed for 11" tall boots, and larger sized 8" boots.
- 205cm: Listed for 11" tall boots in larger sizes.
Why round laces suit hiking boots
Zamberlan's replacement Round Boot Laces fit through most eyelet designs and offer less pulling resistance than traditional flat laces. On a hiking boot, that lower resistance can make it easier to tension the lacing evenly from the bottom eyelets up to the top.
Round laces also tend to sit neatly in metal eyelets and speed hooks without the wide, flat profile that can bunch at tight turns. If your boots have narrow eyelets or a mix of hooks and eyelets, round is the shape the catalog identifies as compatible with most eyelet designs.
The trade-off is that round laces can feel different in hand than flat laces, especially if you are used to pulling a wide ribbon tight. Give yourself a few outings to adjust to the new feel before deciding the length or tension is wrong.
What the Zamberlan round lace offers
- ROUND BOOT LACES - Black/Ash: Zamberlan replacement Round Boot Laces fit through most eyelet designs and offer less pulling resistance than traditional flat laces. Compatibility with most eyelets is the first thing to check before relacing hiking boots, and lower pulling resistance helps you tension the lacing evenly.

ROUND BOOT LACES - Black/Ash - ROUND BOOT LACES - Black/Ash: Zamberlan replacement laces are described as among the best in the market for long-lasting durability and come in different colors and sizes to match different sizes and styles of boots. Durability matters on abrasive trails, and the range of colors and sizes means you can match both the boot and the fit.
Choosing black or ash grey
The Black/Ash colorway gives you two dark, neutral directions. Black is the straightforward black boot laces replacement for dark leather, black suede, and most black or charcoal synthetic uppers. Ash grey is the softer option: it sits closer to grey-brown leather, faded black, and uppers with visible scuffs or a matte finish.
If your boots are dark brown rather than black, ash grey often blends more naturally than a hard black lace. If your boots are true black, black keeps the look unified. Neither choice is wrong; pick the one that matches the dominant tone of the upper rather than the color of the sole or the hardware.
- Black: Best for black leather, black suede, and dark synthetic uppers where you want the lace to disappear into the boot.
- Ash grey: Best for grey-brown leather, faded black, and matte finishes where a softer contrast looks more natural.
Relacing hiking boots without losing tension
Once you have the right length, relacing is straightforward. Work from the bottom up and keep the lace flat as you thread it so it does not twist inside the eyelets.
- Remove the old lace and clean the eyelets: Pull the old lace out completely and wipe any grit or dried mud from the eyelets and hooks before threading the new lace.
- Thread from the bottom: Start at the lowest pair of eyelets and work upward, keeping the two ends even as you go so you do not run out of lace at the top.
- Check the length before you tie: Once threaded, compare the free ends to your old lace. If one side is much shorter, the lace may be too short for your boot height and lacing pattern.
- Tension gradually: Tighten from the bottom eyelets upward rather than pulling hard at the top, so the fit stays even across the instep.
Keep a spare pair in your pack
Laces fail at the worst times, usually on a long descent or in wet conditions. Zamberlan suggests keeping one spare pair in your backpack just in case. A spare set takes up almost no room and saves you from improvising with cord or hiking out with a loose boot.
Store the spare pair dry and coiled loosely rather than compressed in a pocket, so the lace does not take a permanent kink before you need it.
Sizing evidence for the Black/Ash round lace
- ROUND BOOT LACES - Black/Ash: The Zamberlan Round Boot Laces sizing chart lists 150cm for 5" and 6" tall boots, and 190cm for 11" tall boots and larger sized 8" boots. These are the two sizes available in this colorway, so check your measured lace against both entries before ordering.
- ROUND BOOT LACES - Black/Ash: Zamberlan replacement laces come in different colors and sizes to match different sizes and styles of boots. If Black/Ash is not the right tone for your leather, the same lace family offers other colorways in the same length options.

